|
|
|
Forum Newbie
Group: Forum Members
Last Login: 10/3/2008 3:03:34 AM
Posts: 1,
Visits: 2
|
|
i have went to get my 1996 nissan maxima check engine light looked at. WEll the did run the test but gave me some codes use to solve the problem. First code was code P0130 oembrand obdII which were four problems there oxygen sensor defective, fuel system running rich , engine misfire which most likely could be the reason i accidently took out the engine ignition 7.5 fuse then started the car. The light may have then came on. also fuel pressure very high or low fuel punp pressure regulator listed on the trouble shooting problem. How do i fix this problem i did put back the fuse after i started it but the light did not go off. Another code is the p1105 which is referring to the map/ barometer pressure switch solenoid valve. where is that located can i try to repair or replace it.on my own. THe last one was the p0105 vaccumm hose off which i checked and the hose was not in all the way.i tried to push it in but it comes right out the bolt is missing on the end by the front of the hood. it could have been the throttle body intake tube im referring to . THe map barometer is also listed mainifold absolute pressure defective where is that part located and what does it look like. LAst the vane air flow maf mass air flow sensor dirty or defective. can you help me locate these problems and help me troubleshoot them. thank you .
allende barajas jr.
|
|
|
|