mOByDic Hardware Failure??
Digimoto Forum
Home       Members    Calendar    Who's On
Welcome Guest ( Login | Register )
        



mOByDic Hardware Failure?? Expand / Collapse
Author
Message
Posted 4/7/2008 9:42:13 PM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: 4/20/2008 9:50:39 PM
Posts: 4, Visits: 13
I've had my mOByDic for about a year and a half.  I've used it about 6 or 7 times.  Last time I used it was about 6 weeks ago.  It worked perfectly.  Today, however, nothing.  No green or yellow light.  So, I hooked it up to my vehicle where I know it worked, but, still nothing. I have re-connected connectors to try and troubleshoot.  I used a multimeter to make sure there was power coming from the OBD and there is. 

Besides the obvious possibility of hardware failure, is there anything else I could try?  If not, it's time to shop.  (I know the warranty has expired so, I'm not trying to go that route.)   

If it is hardware failure, I'll say this much.  My mOByDic cost $150.00 or so.  It's saved me approximately $350.00 in repair parts and ??? in shop fees. 

Thanks,

Brian P.

Post #4284
Posted 4/7/2008 9:54:40 PM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: 4/20/2008 9:50:39 PM
Posts: 4, Visits: 13
NEVER MIND.  Looking at the manufacturer's website, I found a schematic.  I'm going to troubleshoot it just for the hell of it.
Post #4285
« Prev Topic | Next Topic »


Reading This Topic Expand / Collapse
Active Users: 0 (0 guests, 0 members, 0 anonymous members)
Forum Moderators: johnb, Robert, Digimoto Donna

All times are GMT -5:00, Time now is 8:00pm

Powered By InstantForum.NET v4.1.4 © 2009
Execution: 0.219. 16 queries. Compression Disabled.