|
|
|
Supreme Being
Group: Forum Members
Last Login: 6/2/2008 7:55:54 PM
Posts: 581,
Visits: 181
|
|
The ELM chip is an extremely popular chip with the DIY mechanics. Although the ELM chip is known for its slower pulling speeds, it is a low cost, very popular chip that has been in use for years. The designers of the ELM chip (ELM Electronics) work with many distributors who supply the ELM based interfaces to consumers. Digimoto 5.0 is fully compliant with all ELM based chips (320,322,323,327 etc.). If you are looking for an ELM based hardware solution we recommend www.obd2allinone.com. They offer high quality ELM327 based interfaces at an extremely low price. The ELM327 chip supports all OBDII protocols: ISO15765-4 (CAN), ISO14230-4 (KWP2000), ISO9141-2, J1850 VPW, J1850 PWM.
Joel Konecny
|
|
|
|
|
Forum Newbie
Group: Forum Members
Last Login: 11/5/2007 2:55:29 PM
Posts: 3,
Visits: 13
|
|
| That what I have the ODBALLINONE USB based on ELM327 and version 5.0 does not work with it. Well I still did not get any reply from Digimoto on this problem The software hungs up and crushes loosing the vehicle communication. Digimoto lite 4.0 works just fine with the same adapter
|
|
|
|
|
Forum Newbie
Group: Forum Members
Last Login: 7/2/2008 12:11:35 PM
Posts: 3,
Visits: 5
|
|
| i also have Digimoto v5 and am using the ELM323 usb connector. but am getting an error message of can NOT open serial reader ELM on com4 9600 baud, databits: 8, parity: none, stopbits: one, handshake: none. the vehicle im trying to use this with is a UK spec peugeot 206 SW 2.0HDI Dturbo. the operating system on my laptop is windows vista, and i dont know if this is maybe the problem. any help on this matter would be greatly appreciated. thanks also, when configuring the hardware settings, i get this when it finds the com port Testing COM settings... Testing for
Scan Tool: ELM
on COM Port: COM4 Baud: 9600
Found: True
Found Name:
Version: ELM323 V2.0
COM Port: COM4
***** WITHOUT Protocol *****
|
|
|
|
|
Forum Guru
Group: Administrators
Last Login: 12/8/2008 9:43:36 AM
Posts: 69,
Visits: 169
|
|
| It looks as if the software is finding your scanner, but your scanner is not finding your car, this could be a compatability issue with your single protocol tool and yoru vehicle. Email me at donna@digimoto.com for furthor help in determining if this is indeed the problem.
|
|
|
|